DISCONTINUED - Click on link for more information.  For a product data sheet or replacement product information, please see the contact information at the bottom of this page.  

DRAW-EX 100 is a premium quality cutting oil designed for use with stainless steel in a variety of machining applications including wire drawing and medium- to heavy-duty cutting.

• In stainless steel wire drawing, DRAW-EX 100 extends diamond die life beyond that provided through the use of conventional drawing fluids.
• Excellent oxidation stability extends the trouble-free working life of the fluid
• Enhanced rust protection for workpieces and exposed parts of the machine

DRAW-EX 100 is designed for use with stainless steel in a variety of machining applications including wire drawing and medium- to heavy-duty cutting. Applications for DRAW-EX 10 may also include tough-to-machine ferrous alloys.

DRAW-EX 100 contains chlorine and active sulfur products and therefore should not be used with copper or its alloys. Care should be taken to ensure that the metalworking fluid system does not contain copper alloy valves, pipes, or fittings.

Health studies have shown that many petroleum hydrocarbons pose potential human health risks that may vary form person to person. As a precaution, exposure to liquids and vapors of petroleum products should be minimized.

Oil and greases in contact with the skin can result in removal of skin oils and plugging of sweat glands and hair follicles. This can lead to skin irritation and dermatitis. Therefore, good personal hygiene should always be practiced. DRAW-EX 100 should be promptly removed from the skin. Soiled clothing should not remain in contact with the skin.

Oils and greases are readily removed from the skin by waterless hand cleaners, followed by washing with soap, water, and a soft skin brush. They can be removed from clothing by dry-cleaning or by washing with laundry detergents. Where repeated skin contact occurs, protective skin creams, such as silicone-base creams, applied to clean hands prior to contact may be beneficial.

If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides.

WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition; they may explode and cause injury or death. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explosive hazard. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

Additional important health and safety information on this product can be found in the Material Safety Data Sheet which is available online at www.exxon.com or by contacting Exxon Branded Lubricants, ExxonMobil Lubricants and Petroleum Specialties Company, North America Technical Services - MSDS, 3225 Gallows Road, Fairfax, VA 22037.