UNIVIS Special Mist EP oils are formulated to meet the needs for effective anti-stain lubricants for use in mist lubrication applications in aluminum cold rolling mills.

• Low volatility, for effectiveness in the severe environment of mist lubrication systems
• Compatibility with products based on NORPAR
• Mild Extreme pressure (EP) properties, for bearing protection
• Qualification against FDA 21 CFR 178.3570, Lubricants With Incidental Food Contact
• Alcoa Aluminum Stain Test approved
• Anheuser-Busch Taste Test approved
• Satisfies USDA H-1 requirements

These products have a solid history of successful bearing protection in mist lubrication systems at commercial aluminum mills and beverage canning plants throughout the U.S. In addition, they are approved by USDA as H-1 food grade lubricants.

For those applications in which a need for higher (60#) Timken OK Load outweighs the need for FDA qualifications, see the Product Information Bulletin Exxon Low-Stain 60# Timken Mist Oils For The Aluminum Cold Rolling Industry.

Health studies have shown that many petroleum hydrocarbons pose potential human health risks that may vary from person to person. As a precaution, exposure to liquids and vapors of petroleum products should be minimized.

Oils and greases in contact with skin can result in removal of skin oils and plugging of sweat glands and hair follicles. This may lead to skin irritation or dermatitis. Accordingly, good personal hygiene should always be practiced. UNIVIS Special Mist EP oils should always be removed from the skin promptly. Soiled clothing should not remain in contact with the skin.

Oils and greases are readily removed from the skin by waterless hand cleaners followed by washing with soap, water, and a soft skin brush. They can be removed from clothing by dry-cleaning or by washing with laundry detergents. Where repeated skin contact occurs, protective skin creams, such as silicone-base creams, applied to clean hands prior to contact may be beneficial.

If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides.

WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition; they may explode and cause injury or death. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explosive hazard. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

Additional important health and safety information on this product can be found in the Material Safety Data Sheet which is available online at www.exxon.com or by contacting Exxon Branded Lubricants, ExxonMobil Lubricants and Petroleum Specialties Company, North America Technical Services - MSDS, 3225 Gallows Road, Fairfax, VA 22037.