TERESSTIC FG 150 is designed specifically for can-seaming machines in the beverage canning industry. TERESSTIC FG 150 provides the ability to protect beverages and other food products from contamination with non-food grade lubricants during packaging, while protecting the equipment from corrosion and wear.

• Compliance with FDA 21 CFR 178.3570, "Lubricants With Incidental Food Contact"
• USDA H-1 approved.
• Anti-wear (AW) properties
• Excellent rust protection, even in the presence of syrups and juices
• Superior oxidation stability, for long, trouble-free life
• Balanced dispersancy and controlled emulsibility

TERESSTIC FG 150 is designed specifically for can-seaming machines in the beverage canning industry

Health studies have shown that many petroleum hydrocarbons pose potential human health risks that may vary from person to person. As a precaution, exposure to liquids and vapors of petroleum products should be minimized.

Oils and greases in contact with skin can result in removal of skin oils and plugging of sweat glands and hair follicles. This may lead to skin irritation or dermatitis. Accordingly, good personal hygiene should always be practiced. TERESSTIC FG 150 should always be removed from the skin promptly. Soiled clothing should not remain in contact with the skin.

Oils and greases are readily removed from the skin by waterless hand cleaners followed by washing with soap, water, and a soft skin brush. They can be removed from clothing by dry-cleaning or by washing with laundry detergents. Where repeated skin contact occurs, protective skin creams, such as silicone-base creams, applied to clean hands prior to contact may be beneficial.

If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides.

WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition; they may explode and cause injury or death. Do not attempt to clean since residue is difficult to remove, and even a trace of remaining material constitutes an explosive hazard. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

Additional important health and safety information on this product can be found in the Material Safety Data Sheet which is available online at www.exxon.com or by contacting Exxon Branded Lubricants, ExxonMobil Lubricants and Petroleum Specialties Company, North America Technical Services - MSDS, 3225 Gallows Road, Fairfax, VA 22037.