CHAIN OIL 22 is an economical uninhibited mineral oil for the lubrication of chain saw bars, chains, and other applications with non-critical requirements or where oxidizing influences are not severe.

Oils and greases in contact with skin can result in plugging of sweat glands and hair follicles. This can lead to skin irritation or dermatitis. Therefore, good personal hygiene should always be practiced. CHAIN OIL 22 should be promptly removed from the skin. Soiled clothing should not remain in contact with the skin.

Oils and greases are readily removed from the skin by waterless hand cleaners followed by washing with soap, water, and a soft skin brush. They can be removed from clothing by dry-cleaning or by washing with laundry detergents. Where repeated skin contact occurs, protective skin creams, such as silicone-base creams, applied to clean hands prior to contact may be beneficial.

If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides.

WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition; they may explode and cause injury or death. Do not attempt to clean since residue is difficult to remove and even a trace of remaining material constitutes an explosive hazard. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

Additional important health and safety information on this product can be found in the Material Safety Data Sheet which is available online at www.exxon.com or by contacting Exxon Branded Lubricants, ExxonMobil Lubricants and Petroleum Specialties Company, North America Technical Services - MSDS, 3225 Gallows Road, Fairfax, VA 22037.